TP-LINK MC112CS

A high-quality and reliable media converter designed to convert media from the 100BASE-FX optical line to the 100Base-TX metallic conductor and vice versa. This converter is intended to be used with a single-mode optical cable with an SC connector. The costs for cabling will be reduced to half due to the WDN technology that uses only one optical cable to send and receive data. The device uses a wavelength of 1310nm for data transmission and 1550nm for data reception. The other end device that is to work with this module must use a 1550nm wavelength for data transmission and 1310nm for data reception, such as the converter TP-LINK MC111CS. This module can also be used as a separate device (no chassis required).

Parameters and Specifications:

Standards and Protocols:
IEEE 802.3, IEEE 802.3u, IEEE 802.3x

Basic functions:
The WDM technology
A Half-duplex/full-duplex mode for an FX port
Full-duplex flow control (IEEE 802.3x)
Half-duplex flow control (Backpressure)
The functions Link Fault Passthrough and Far End Fault minimise loss due to interrupted connections
Extends the range of the optical line up to 20km

Ports:
1x 100M SC port
1x 100M RJ45 (Auto MDI / MDIX) port

WDM TX:
1310nm

WDM RX:
1550nm

Network Media 10BASE-T:
UTP category 3, 4, 5 (max. 100m)
EIA/TIA-568 100 ? STP (max. 100m)

1000BASE-T network media:
UTP Category 5, 5e cable (max. 100m)
EIA/TIA-568 100 ? STP (max. 100m)

1000BASE-FX Network Media:
A one-wire optical cable

LED indicators:
PWR, FDX/Col, Link/Act, SPD

Dimensions:
94.5 x 73 x 27mm

Power supply:
An external power adapter

Security and emissions:
FCC, CE

Operating environment:
Operating temperature: 0-40?
Non-operating temperature: -40-70?
Operating humidity: 10-90% non-condensing
Non-operational humidity: 5-90% non-condensing