OKI POS PT390 LAN

POS printer OKI PT 390 is resistant against dust and splashing water . It is therefore perfectly suited to the busy operations, advocacy lot of work.

With this type of printer, you can choose between four paper width (82.5 mm, 80 mm, 60 mm and 58 mm) and different media thickness (from 60 to 150 microns). Therefore easily print receipts, coupons and labels. The resolution printer offers 203 dpi in values, which is standard, or 180 dpi in enhanced mode. The printer also supports nine types of one-dimensional and three types of two-dimensional barcodes . In short, nothing is a problem for her.

In case you want a discount, or event and you want to attract, You can use the print red, blue or green symbols . Color printing of such depends on the type of thermal paper.

With a storage capacity of up to 384 KB, you can easily store the printer in a series of graphic symbols and logos.

Printer PT330 can cut the size of its paper, which is necessary for the overall print. Top of the receipt, which usually remains empty, shorten pulled back through the paper after printing each receipt. This reduce paper consumption by 5.7% print receipts with a length of 150 mm or about 2.9% of printing receipts length of 250 mm. Another way to reduce paper consumption is to use the Windows driver, which includes the function of reducing the vertical size of the print. This shortens the length of the receipt of up to 50% without loss of printed information. Depending on the size of the printed receipts can thus save up to 50% .

Specifications:

Printing Method:
Direct Line Thermal Recording

Print resolution:
Up to 203 dpi (8 dots/mm)

Print speed:
Up to 260 mm/second

Connections:
Centronics IEEE-1284 Nibble Mode Compliance (Anphenol 36 pins), RS232C (D-SUB 25 pins) + USB2.0 Full speed (Type-B port x 1), 10 BASE-T/100BASE-TX (RJ-45 x 1 port)

Emulation:
ESC/POS

Thickness of paper:
60µm (0.060 mm) to 150µm (0.150 mm)

Dimensions of paper roll:
Up to 102 mm diameter (Paper thickness 60 to 90µm); Up to 90 mm diameter (Paper thickness 90 to 150µm)

Paper width:
58 mm: 48 mm (384 dots) or 52.5 (420 dots); 60 mm: 54.5 mm (436 dots); 80 mm: 64 mm (512 dots) or 72 mm (576 dots); 82.5 mm: 80 mm (640 dots)

Memory:
Logo Store 3Mbits (384Kbytes)

Power Supply:
24VDC, +/- 10%

Operating temperature/humidity:
0? to 40?/10% to 95% RH (without condensation, Highest wet bulb temperature: 29? Or less)