nJoy Token 600

The nJoy Token 600 UPS operates as a line-interactive UPS with an apparent power of 600VA and a real power of 360W. This configuration effectively protects computer systems, network components and other sensitive electronics. At half load (180W), it powers connected devices for 5.5 minutes, providing enough time to save your work and safely shut down the system. The integrated Automatic Voltage Regulation (AVR) actively stabilises the output voltage. The fanless design contributes to its quiet operation, which is crucial for use in an office or home environment. Its compact design with a wall-mounting option also makes it easy to install, even in limited spaces.

Voltage stabilisation and power

This UPS works with a line-interactive topology that uses Automatic Voltage Regulation (AVR). The AVR system compensates for grid fluctuations in the 170–280VAC range without switching to the battery. When running on battery power, it generates a simulated sine wave output. It automatically detects the mains frequency of 50Hz or 60Hz. The output voltage is maintained at 230VAC with a tolerance of ±10%.

Battery and protection features

Inside, there is a single GP07122F battery which is easy for the user to replace. It takes 6 to 8 hours to recharge to 90% capacity. The cold start function lets you start the UPS even without mains power. The integrated protection features safeguard the battery against deep discharge and overcharging, extending its lifespan. Connected electronics are then protected by surge protection with 475J of energy absorption and overload protection. The unit automatically restarts once the power supply is restored.

Management and silent operation

The USB communication interface is used for management and monitoring with HID protocol support. This implementation does not require special drivers for basic functions; the system recognises the UPS automatically. For advanced configuration, the ViewPower software provides access to detailed telemetry data and automatic computer shutdown settings. The entire design is fully passive and fanless. The absence of moving parts means completely silent operation and zero dust intake, which extends the life of internal components and eliminates the need for cooling maintenance.

Connectivity and sockets

The rear panel contains a total of eight Schuko-type output sockets, which are logically divided into two groups. The first group of four sockets provides both battery backup and surge protection. It powers critical devices such as a computer and monitor. The second group, also with four sockets, provides only surge protection. It connects peripheral devices that do not require backup, such as printers, scanners or speakers. This division makes efficient use of the battery capacity.