DEEPCOOL AG620 G2 WH ARGB
- Help and manuals
- Specifications
- Photos & Videos 10
- Alternatives 7
- Accessories and suggested products
DEEPCOOL AG620 G2 WH ARGB
The DEEPCOOL AG620 G2 WH processor cooler dissipates heat from your computer's processor using airflow. It features a dual-tower design and two 120mm fans. The device transfers thermal energy to the surrounding area through six 6mm heat pipes. The cooler supports Intel LGA 1700, LGA 1851 and AMD AM4, AM5 sockets. The nickel-plated copper base uses Core Touch Technology 2.0 for direct contact with the processor.
Key features of the DEEPCOOL AG620 G2 WH, ARGB processor cooler
- The cooler has six 6mm copper heat pipes
- Two 120mm fans
- Cooling system weight of 1.046kg
- Fans with Hydro Bearing technology
- Speed control in the range of 500–2000±10% RPM / 500–2200±10% RPM
- Addressable ARGB lighting with a power consumption of 1.7W
Cooler design
The cooling system consists of two separate aluminium towers. The towers are firmly connected to the nickel-plated copper base. A metal block provides solid support for the entire structure. The total height of the cooler is 159mm, which fits standard computer case dimensions. The cooler has a depth of 129mm and a width of 136mm.
Effective heat dissipation
The metal base uses Core Touch Technology 2.0 for direct contact with the processor. Six 6mm heat pipes run through the entire aluminium fin stack. The system distributes thermal energy evenly across the entire surface of the fins. The fins have a high density for more effective cooling.
Fans
The two included fans measure 120×120×25mm. The design, with its enclosed blades and reinforced structure, directs airflow and prevents unwanted side flow. The rotors use fluid dynamic bearings for quiet operation with a single-phase four-pole, four-slot motor. The front fan has a power consumption of 1.8W at a rated current of 0.15A, and the rear fan draws 2.16W at a current of 0.18A. The airflow is up to 68.85CFM and the static pressure is up to 2.10mm H2O.
Speed control and noise level
The speed of both fans is controlled by automatic PWM regulation via a 4-pin connector. The front fan operates in the range of 500 to 2000RPM. The rear fan rotates at speeds of up to 2200 RPM. The noise level of the front fan does not exceed 28.1dB and the rear fan produces a maximum noise level of 30.93dB. The static air pressure is up to 2.10mm H2O.
Addressable cooler backlighting
The fans contain integrated addressable RGB LEDs with a multi-colour effect. The backlighting requires a 5V power supply with a power consumption of 1.7W. The ARGB connector has a standard three-pin connection labelled +5V-D-G. The system works with the synchronisation software of compatible motherboards. You can fully customise the lighting across your entire computer.
Installation and mounting
The cooler is mounted to the motherboard using a double-sided backplate. The package includes mounting clamps for various processor sockets. The installation kit creates stable and firm pressure on the processor. The cooler supports Intel LGA 1700 and LGA 1851 sockets as well as AMD AM4 and AM5. The package also includes a thermal pad and the necessary screws.
Cooling:
Air
Number of included fans:
2× 120mm
Bearing type:
Hydro-Dynamic Bearing (HDB)
Airflow:
68.85CFM
Number of heat pipes:
6
Speed control:
500–2000±10% RPM / 500–2200±10% RPM
Supported Intel Sockets:
LGA 1700, LGA 1851
Supported AMD Sockets:
AM4, AM5
Backlight colour:
ARGB
Weight:
1.046kg
Specifications
Backlight
Fan speed
Technical specification
Socket
Heatpipe
Dimensions
Weight
This product is not an independently functional unit and may require professional installation.
Specifications can be changed without notice. Images are for illustrative purposes only.
