BWT Quick & Clean Shower Filter Set
BWT Quick & Clean Shower Filter Set
The BWT Quick & Clean filter system delivers soft water and thus prevents limescale build-up. The unit, which is installed between the shower mixer and the shower hose, contains a replaceable limescale filter. The Quick & Clean system effectively prevents unsightly stains in shower enclosures caused by hard water due to its higher calcium content. After showering, you can activate the filter at the touch of a button to rinse shower walls, fittings and tiles with soft water without the need for further cleaning or drying.
Key Features of the BWT Quick & Clean Shower Filter
- Anti-scaling protection system
- Provides filtered soft water
- Prevents scale build-up from hard water
- Installation between shower or bath tap and shower hose
- The BWT Quick & Clean filter is simply activated at the touch of a button
- One filter cartridge lasts up to 3 months
- Package contains 1 filter
Saves time and the environment
The BWT Quick & Clean Shower Filter saves you the time you would have spent scrubbing your shower frequently. Harder water contains a lot of calcium, which is deposited as limescale in the form of unsightly stains. The Quick & Clean filter delivers guaranteed soft water and prevents limescale on shower walls, fittings and tiles. After rinsing your shower or bath, you no longer need to wipe or dry the surfaces. By using the BWT Quick & Clean filter, you are helping to save the environment as no harmful chemicals are required for effective cleaning. The minimum guaranteed time for proper filtration of one cartridge is 1 month, but it can last up to 3 months. Its endurance depends on the hardness of the water. It is recommended to change the filter when the first residues of limescale start to appear on the washed surfaces.
Using the BWT Quick & Clean Protection System
The installation of the protection system is very easy. The filter is attached between the shower or bath tap and the shower hose. Filtering is activated by pressing the button. Rinse shower walls, fittings and tiles with filtered soft water after showering. This immediately prevents the formation of deposits and flushes away soap or shampoo residues. After rinsing, you don't have to wipe off any residual water and your bathroom stays sparkling clean for longer.
Technical information:
connection thread 1", operating pressure 2-8 bar, water supply pressure 2 bar, max. water temperature 50 °C, ambient temperature, min. 4 - max. 40 °C, distance from the wall min. 21mm
WT Quick & Clean unit
1 pcs filter
2 pcs of new rubber thread seal
instructions for use
Specifications
Type
Filtration
Features
Expro Mobil s.r.o., Kampelíkova 888, Hradec Králové 500 04, +420 737 164 165, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
