Insta360 Electric Suction Cup Mount
Insta360 Electric Suction Cup Mount
Insta360 Electric Suction Cup Mount
The Insta360 Electric Suction Cup Mount is designed for creating stable automotive footage with an emphasis on a secure fit and smooth resulting video. The one-touch locking mechanism allows for quick and tight attachment, while the integrated sensor continuously monitors and maintains suction force for maximum stability during the ride. The design is engineered for use in harsh environments and has been tested to withstand up to 800G of shock, adding confidence for dynamic shooting. The flexible dual ball head allows for precise camera angle adjustment and easy shot composition. The mount is compatible with the NATO rail system as well as the Insta360 Dual/Triple Suction Cup Car Mount to expand your creative shooting options. When used with the Insta360 GO Ultra, the separately sold GO Ultra Quick Release Mount is required.
Key Features of the Insta360 Electric Suction Cup Mount
- Strong suction mount for stable car shots
- One-touch locking for fast and secure attachment
- Integrated sensor for automatic control and maintenance of suction force
- Tested to withstand up to 800G of shock for use in harsh environments
- Lasts up to 120 hours on a single charge
- Compatibility with NATO rail system
- Compatible with Insta360 Dual/Triple Suction Cup Car Mount for expanded coverage
- Flexible double ball head for precise angle adjustment
- When used with Insta360 GO Ultra, the GO Ultra Quick Release Mount (not included) is required
Electric suction cup holder
The mount with electric suction system allows the camera to be stably mounted on the vehicle and produce smooth car shots. Designed to capture dynamic scenes while driving, the design supports capturing action-packed perspectives from the exterior of the vehicle.
Confidence on every journey
The electric pump automatically removes the air and maintains a strong and stable vacuum for a reliable fit using a built-in sensor. The design is engineered and tested for use in harsh environments, including rough off-road roads and winding mountain trails.
Under laboratory conditions, the suction cup achieves a maximum holding force of up to 50 kg when mounted vertically on a smooth surface and maintains a minimum holding force of 30 kg in long-term use.
One-touch attachment
With a single press, the holder instantly locks into place and ensures a firm hold on the vehicle surface. Built-in sensor continuously monitors grip strength, so that the camera is securely fixed during the journey without the need for constant checking.
Long endurance for all-day shooting
Long-lasting battery life allows up to 120 hours of operation and up to 5 days of grip retention on a single full charge, ideal for extended travel and road trips.
The endurance is calculated by restoring the suction force once per hour. Actual operating time may vary depending on surface smoothness and vibration intensity.
Shots from any angle
The dual ball head allows full 360° rotation and precise camera adjustment to achieve the ideal angle from the hood, roof or rear of the vehicle. The mount is compatible with the Insta360 Ace, X and GO series cameras, expanding the possibilities for creative filming while driving.
More shots, more options
Compatibility with the NATO rail system and Insta360 Dual/Triple Suction Cup Car Mount expands mounting options and allows you to create even more dynamic and cinematic angles.
Accessories are sold separately.
Double security of attachment
Integrated safety rope hole allows attachment of a safety line, which increases the security of the camera mount even when driving on slopes or at higher speeds.
The safety rope is sold separately.
Secure attachment for dynamic shots
- With the device switched off, press the button once to see the current battery level on the display.
- With the device switched off, press and hold the button for 2 seconds to switch on the electric suction cup holder. The air extraction is then automatically triggered to create a vacuum.
- Press the holder firmly against the surface until the display starts to show a higher percentage of adhesion. If the battery is below 10%, the device will sound an audible alert every 5 seconds.
- During the pressing process, the indicator flashes green and the display shows the current level of adhesion. If no adhesion is detected within 10 seconds, the device will automatically switch off. Once the attachment is complete, the indicator lights up permanently in green and it is possible to gently test the stability of the attachment by shaking it. The built-in sensor continuously monitors the pressure and automatically resumes suction when it drops.
- Press the air release button twice during or after use. The display and indicator will flash yellow.
- For manual removal, the holder can be released by pulling the handle. After removal, the attachment process is automatically reactivated. To turn off the device, hold the button or automatically after 10 seconds of inactivity.
- Once the air has been released, the device can be reactivated at the touch of a button.
Important notes on use
The bracket must not be subjected to drops, bumps or throwing to prevent damage to the structure. It is not intended for use in the rain and must not be exposed to grease or chemical solvents for long periods of time, as they can reduce the grip of the suction cup. Ensure that the vehicle surface is smooth and clean before installation. Before activating the suction cup, it needs to be pressed firmly against the surface and then the angle needs to be fine-tuned. During installation, it is necessary to keep the bottom filter layer of the suction cup clean to prevent the ingress of dust and dirt. The USB-C port must always be protected by a silicone cover when not charging to avoid damage from moisture or dust. After use, the suction cup must be cleaned to maintain maximum adhesion. The battery must be checked regularly when it is mounted on the vehicle. If it falls below 10%, the device must be fully recharged before further use. During prolonged use it is recommended to check the stability of the attachment periodically. If the device is not used for a long period of time, the battery must be recharged regularly. The holder must only be used according to the manufacturer's instructions and must not be combined with other accessories such as a selfie stick. Failure to follow the instructions may result in loss of warranty.
Package contents
- 1× electric suction cup holder
- 1× protective cover
- 1× clamp bracket
- 1× 1/4" ball head adapter
- 1× 3-prong adapter for ball head
- 1× NATO rail assembly
- 1× Allen key
- 1× thumb screw
Technical specifications
- Suction cup diameter 115 mm (4.5 in)
- Battery capacity 1000 mAh
- Battery energy 3.7 Wh
- Battery type Li-ion
- Operating temperature -15 °C to 55 °C
- Storage temperature -5 °C to 35 °C
- Charging temperature 0 °C to 40 °C
- Input power supply DC 5 V / 1 A
Specifications
Compatibility
Location
Features
Specifications can be changed without notice. Images are for illustrative purposes only.
