Ubiquiti UniFi Building Bridge XG
Ubiquiti UniFi Building Bridge XG
The UniFi Building to Building Bridge XG is a very compact 60GHz point-to-point (PtP) device with support for 802.11ad/ay standards and built-in 5GHz backup (WiFi 5 - 802.11ac) from Ubiquiti Networks with a range of up to 500m+.
Key Features of the Ubiquiti UBB-XG Bridge
- It is ideal for connecting two buildings over a short distance
- The device is equipped with a Gigabit LAN port with PoE support, one SFP+ port and Bluetooth for easy setup from your mobile phone via UniFi Network app
- The device supports only bridge mode and supports both 2160 and 4320MHz channel width in 60GHz spectrum
- The maximum throughput claimed by the manufacturer is 6 Gbps
- Supported channels are 58320, 59400, 60480, 61560, 62640, 63720, 64800 - depends on the place of use
- Gigabit LAN port with passive PoE (48V DC) support
- Setup via UniFi Network app from version 6.3
- Centrally manage multiple networks
- Enjoy real-time device statistics and lots of configuration options
- Upgrade device firmware remotely
- Easily manage network users and guests
- Customize the design, architecture and privacy of guest hotspots
- Quickly set up and manage devices on the go with a powerful mobile app
Parameters
channel width: 2160, 4320 MHz
Transmission speed - 5G Hz: 866 Mbps
Transmission rate - 60G Hz: 6000 Mbps
Maximum throughput: 6 Gb/s
Maximum range: 500 m+
Encryption: WPA2 AES
Network interface: 1 × GbE RJ45, 1 × 1/10G SFP+
Management Interface: Ethernet, Bluetooth
Power supply method: PoE++ passive PoE [4 pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-) or 2 pairs (4, 5+; 7, 8-)]
Power source: UniFi PoE switch 48 V, 0.65 A, gigabit PoE adapter (included)
Power over PoE: 802.3 bt, 48 V DC
Max. energy consumption: 31,2 W
LAN speed:1 × 10/100/1000 Mbps
Optical interface:1 × 1/10 Gbps
Bluetooth: Yes
Designed for mast diameter: 25.4 - 63.5 mm
Weather resistance: IPX6
WiFi standards:802.11 ad/ay 802.11 ac (WiFi 5)
Operating mode: PtP
Dimensions:191,8 × 191,8 × 59 mm
Weight: 1,7kg
Weight with holder: 2,9 kg
Package contents
- 2 × device
- 2 × holder with fine tuning
- 2 × PoE power adapter 48 V / 0.65 A
- 2 × power cable
Specifications
Standards and frequency
Functions
Speed
Security
Antenna features
Advanced parameters
Number of LAN ports
Dimensions and weight
Antenna features
PoE properties
Package contents
PoE charging
Ubiquiti International Holding B.V., Ekkersrijt 3102. Son en Breugel, 5692 CC. Netherlands, [email protected]
Specifications can be changed without notice. Images are for illustrative purposes only.
