Fujitsu 2GB (Kit 2x1GB) DDR2 667MHz PC2-5300F Fully Buffered ECC
Fujitsu 2GB (Kit 2x1GB) DDR2 667MHz PC2-5300F Fully Buffered ECC
Discontinued
Fujitsu 2GB (Kit 2x1GB) DDR2 667MHz PC2-5300F Fully Buffered ECC
Výhodný kit two server memory modules type DDR2 Fully Buffered DIMM with a total capacity of 2 GB.It is intended for advanced systems, servers and víceprocesorové computer.Available in a separate box packaging.These memories are intended primarily to powerful servers, Fujitsu Siemens.They are designed for demanding use, promote technology Intel Single Device DataCorrection (SDDC), are therefore ideal for critical applications and essential services.
Fully Buffered Memory Modules work like registered memory, however, are based on a rapid series architecture.The module is a separate circuit AMB - Advanced Memory Buffer, which controls access to memory modules, and facilitates the work of memory controller on the motherboard or processor.The memory modules are connected through this series circuit to an external memory controller and, if necessary, gradually to other modules.Memory is externally behaves as a single chip, which takes care of registration and the reading of each memory cell, and the controller transmitted to the outcome of these operations.This increases the effectiveness of access to memory and speed of processing and using more memory modules at the same time.In addition, significantly simplifies the design of the storage controllers on board, vigorously to reduce the number of pins on the DIMM module and can easily be fitted with a considerably greater amount of memory.Some boards require server Fully Buffered memory.
Technology ECC controls transparent and real-time integrity of data stored in memory.It found a way to correct an error in one bit, and reveal an error in two bitech.Some memory controllers can, in cooperation with ECC memory correct errors and a larger scale.Most boards requires a server with support for ECC memory.
The parameters and specifications:
Type:DDR2 ECC Fully Buffered
Capacity:2 x 1 GB
Certification:PC2-5300th
Max.Working frequency:667 MHz
Compatible servers Fujitsu Siemens
PRIMERGY RX200 S4
PRIMERGY RX300 S4
PRIMERGY TX200 S4
PRIMERGY TX300 S4
Fully Buffered Memory Modules work like registered memory, however, are based on a rapid series architecture.The module is a separate circuit AMB - Advanced Memory Buffer, which controls access to memory modules, and facilitates the work of memory controller on the motherboard or processor.The memory modules are connected through this series circuit to an external memory controller and, if necessary, gradually to other modules.Memory is externally behaves as a single chip, which takes care of registration and the reading of each memory cell, and the controller transmitted to the outcome of these operations.This increases the effectiveness of access to memory and speed of processing and using more memory modules at the same time.In addition, significantly simplifies the design of the storage controllers on board, vigorously to reduce the number of pins on the DIMM module and can easily be fitted with a considerably greater amount of memory.Some boards require server Fully Buffered memory.
Technology ECC controls transparent and real-time integrity of data stored in memory.It found a way to correct an error in one bit, and reveal an error in two bitech.Some memory controllers can, in cooperation with ECC memory correct errors and a larger scale.Most boards requires a server with support for ECC memory.
The parameters and specifications:
Type:DDR2 ECC Fully Buffered
Capacity:2 x 1 GB
Certification:PC2-5300th
Max.Working frequency:667 MHz
Compatible servers Fujitsu Siemens
PRIMERGY RX200 S4
PRIMERGY RX300 S4
PRIMERGY TX200 S4
PRIMERGY TX300 S4
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
