EKO MB Recycled PETG 1.75mm 0.75kg Scarlet Red

5 2 ratings
Filament - made from rPETG, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 0,75kg, print temperature: up to 245°C, print mat temperature: 90°C, recommended print speed: from 40mm/s to 60mm/s
Code:  EKOMBb08

Don't like the alternatives? Choose from the full product list

EKO MB Recycled PETG 1.75mm 0.75kg Scarlet Red


The EKO MB filament will serve as a refill for 3D printers. It is designed with optimal properties for the exact shaping of every minute detail. You are sure to appreciate its precision and quality and the lack of the typically unpleasant filament smell. The Red colour of this 3D printer filament will stay vivid for a very long time. Its weight is about 0,75 kg. The elasticity of the EKO MB Recycled PETG 1.75mm 0.75kg Scarlet Red is 4 - high. The nozzle temperature may reach up to 245 °C during the 3D printing process, and the temperature of the pad should be 90 °C. The EKO MB filament is made of PETG. It is an improved version of PET that has modified glycol, so it is not so fragile. The diameter of the string is 1,75 mm. The tolerance of the diameter is 0,05 mm.

EKO MB Recycled PETG 1.75mm 0.75kg Scarlet Red Filament Key Features

  • Recommend speeds for printing are from 40 to 60 mm/s
  • Red printing filament from EKO MB for 3D printers
  • Heat resistance of the filament by EKO MB: 5 - highest
  • Filament length: 345 m
  • Filament is made using PETG
  • Material properties: rPETG
  • No unpleasant smells and very minimal bubble formation
  • Diameter of 1,75 mm is ideal for printing small, light objects
  • Packaging weight: 0,75 kg

Specifications

String diameter
1.75 mm
Diameter tolerance
0.05 mm
Roll length
345 m

Dimensions

String diameter
1.75 mm
Diameter tolerance
0.05 mm
Roll length
345 m

Weight

Weight
0.75 kg

Features

Number of pcs per pack

Number of pieces in package
1 pc(s)
More Specifications
Note:
  • This product is not suitable for children younger than 10 years of age.
  • Products made of these materials are not suitable for children


Notice:
For the best results, we recommend properly drying the filament before printing.




Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for EKO MB Recycled PETG 1.75mm 0.75kg Scarlet Red