MCOHome Thermostat for electric heating V2, Z-Wave Plus, white
Don't like the alternatives? Choose from the full product list
MCOHome Thermostat for electric heating V2, Z-Wave Plus, white
Place the MCOHome Smart Thermostat for Electric Heating V2 on your underfloor heating or radiator and use the smart home voice control or your phone to control the temperature in your home. Thanks to mains power, you don't have to deal with battery drain and control from smart devices is much easier. Time-based heating scheduling will ensure the ideal temperature at all times, and the holiday mode will set the temperature lower and you can raise it again before returning. In addition, the MCOHome thermostat includes a water meter for humidity control.
Key features of the thermostat for electric heating V2 MCOHome MH7H-EH, Z-Wave Plus, white
- The MCOHome smart thermostat makes it easy to regulate the temperature during the day
- Compatible with smart homes from Google and Amazon
- Temperature settings can be changed via iOS or Android phone
- The MCOHome thermostat allows you to change the temperature during the day
- Holiday mode allows you to control the heater on the move
- MCOHome uses Z-Wave to connect
- The water meter monitors the humidity in the room
Compatible with the manufacturer's app
To use the product's smart features, you need to add the device to the manufacturer's app. For more information about the application (name, supported OS, supported languages) and how to add a device to the application, please refer to the product manual.
Installation and connection
The thermostat is designed to be installed indoors, at a height of approximately 1.5 m above the floor at the point closest to the average room temperature. The thermostat should not be placed where the sun can shine directly on it, where it would be covered (by furniture, curtains, etc. ) and as far away as possible from heating elements and air-conditioning or air-conditioning exhausts. Disconnect the power supply to the thermostat in the cabinet before starting the installation to avoid the possibility of electric shock
Power supply:
85-260 Vdc, 50/60 Hz
Output relay sizing:
MH7H-EH ≤ 16 A
Self-consumption:
≤ 1 W
External temperature sensor (accessories):
Sensor type NTC R25 ℃ = 15 KΩ B25 °C/50 °C = 3550 K
Work environment:
0-50 °C; 0-90% RH (non-condensing)
Dimensions:
86 × 86 × 15 mm
Installation hole diameter:
60-61 mm (standard box KU 68)
Specifications
Connection
Connectivity
Use
Input voltage
Battery
Type
Features
Temperature regulation
Special functions
Indicator
Use
Specifications can be changed without notice. Images are for illustrative purposes only.
