iGET SECURITY M3P17 - wireless PIR motion detector without animal detection for iGET SECURITY M3 and

4.9 7 ratings
Motion Sesnor , connect through Radio frequency, open system with detection motion, range: security, power supply: Battery-Powered,
Code:  NU106x Producer's Website:
iGET SECURITY M3P17 - wireless PIR motion detector without animal detection for iGET SECURITY M3 and Discontinued

iGET SECURITY M3P17 - wireless PIR motion detector without animal detection for iGET SECURITY M3 and

The iGET SECURITY M3P17 wireless PIR motion detector was designed to detect unwanted people indoors, but also suppresses false alarms caused by pets. The sensitive infrared sensor reliably detects the movement of the human body, but no longer reacts to the movement of an animal up to approximately 12 kg. The infrared sensor is carefully programmed for this, and its unwavering detection capability is supported by automatic temperature compensation technology. It also includes anti-sabotage protection. Designed in a modern design, environmentally friendly thanks to low energy consumption.

Motion sensor iGET SECURITY M3P17 - wireless PIR motion detector without animal detection for iGET SECURITY M3 and M4

Key features of the iGET SECURITY M3P17 wireless PIR motion detector without animal detection for iGET SECURITY M3 and M4

  • Indoor occupant detection with pet suppression (up to 12 kg)
  • Wireless accessories for iGET SECURITY M3 and M4 alarm
  • Infrared motion detection with temperature compensation
  • Signalling LEDs (red when moving, yellow when battery is low)
  • 6 possible alarm settings for the M3 alarm (off, immediate, 24 Hours, Home mode, Welcome Gong, delay)
  • The M4 alarm has a trigger already set to immediate mode, and it is possible to add the detector to home mode and give it a delay
  • Possibility to set both incoming and outgoing delays
  • High battery life (up to 2 years)

Technical specifications

Security Coverage: up to 12 m
When mounted up to a height of 2.2 m, the angles are: horizontal 110°, vertical 60°
Broadcast frequency: 433.29 MHz
Operating temperature: - 10 to +50 °C
Operating humidity: 5-95 % (non-condensing)
Supply voltage: 2× 1.5 V, AA batteries
Operating current: 15 mA
Quiet current: 0.025 mA
Signal range to the central unit: up to 100 m in direct visibility

Specifications

Connection
Radio frequency
Power supply
Battery-Powered
Expandability
Open system
Operation
Standalone
Area of use
Security

Connection

Connection
Radio frequency

Connectivity

Power supply
Battery-Powered

Use

Expandability
Open system
Operation
Standalone
Area of use
Security

Input voltage

Input voltage
3V

Battery

Battery type
AA
Number of batteries
2 pc(s)

Type

Product type
Motion detector
Detection Type
motion

Notification

Type of signalisation
Push notification

Material

Cover material
Plastic

Operating environment

Minimum operating temperature
-10 °C
Maximum operating temperature
50 °C
Minimum operating humidity
5 %
Maximum operating humidity
95 %

Location

Usage
Interior
Placement
For walls
Installation
Screw

Battery voltage

Battery voltage
9 V

Dimensions and weight

Height
4.5 cm
Width
14.9 cm
Depth
5.8 cm
Weight
200 g

Motion detection

Horizontal viewing angle
110 °
Vertical angle of view
60 °
Installation height
2.2 m

Use

Use
for alarm
More Specifications

INTELEK LTD, organizační složka, Ericha Roučky 1291/4, Brno, 627 00, Czech Republic, www.intelek.cz, 533 338 858, [email protected]

Note:

Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for iGET SECURITY M3P17 - wireless PIR motion detector without animal detection for iGET SECURITY M3 and