ICY DOCK MB-994SP-4S Quad Bay

The compact ICY DOCK MB994SP-4S is able to work with up to four 2.5 "Serial ATA and SAS hard disks. This makes you ready for any future interface and the drawer will last for a long time. You can load and remove disks while running hot-swap. Insert the HDD / SSD firmly into the internal drawer up to a height of 15 millimeters. You can use the four small screws that are included in the package.

The cooling of the stored disk is solved by massive perforation, steel walls and a pair of 40 mm fans. The holes are located at the top, bottom, front and rear. Installed fans are also equipped with relatively solid intelligence. If there is no hard disk in the cage, it does not spin at all. When the disc is installed only on the right, only the right fan rotates, inversely if the disc is set to the left only. The internal drawer is compatible with the MB991IK frame, making it easy to replace discs.

Parameters and Specifications:

Supported Discs:
Interface: Serial ATA I / II / III or SAS (Serial Attached SCSI)
Format: 2.5 "(up to 15 mm high)
Maximum capacity: 4x 1 TB

Frame Format:
1x 5.25 "

External connectors:
4x 7-pin Serial ATA connector

Cooling:
Massive perforations and steel walls
2x 40 mm fan

ICE:
Indication: power supply (green), unit activity (orange)

Design:
Color: matt black (Matt Black)
Material: SECC / plastic parts
Dimensions: 170 x 146 x 41.5 mm
Weight: 800 g