EKO MB Recycled PETG 1.75mm 0.75kg Metallic Grey

4.7 7 ratings
Filament - made from rPETG, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 0,75kg, print temperature: up to 245°C, print mat temperature: 90°C, recommended print speed: from 40mm/s to 60mm/s
Code:  EKOMBb04

Don't like the alternatives? Choose from the full product list

EKO MB Recycled PETG 1.75mm 0.75kg Metallic Grey


The EKO MB filament serves as a refill for 3D printers. The filament has the perfect properties for the exact printing of every detail. You will love its precision, endurance and the lack of the unpleasant smell typical of such filaments. The Grey colour of this 3D printer filament will keep for a long time. Its weight is roughly 0,75 kg. The elasticity of the EKO MB Recycled PETG 1.75mm 0.75kg Metallic Grey is 4 - high. The nozzle temperature may reach up to 245 °C during printing. The temperature of the pad should be set to 90 °C. The EKO MB filament is made of PETG. This is an improvement on PET that has modified glycol, so it is not so fragile. The diameter of each string is 1,75 mm, and its tolerance is 0,05 mm.

EKO MB Recycled PETG 1.75mm 0.75kg Metallic Grey Filament Key Features

  • Recommended print speeds with this filament range from 40 to 60 mm/s
  • Grey printing filament from EKO MB for 3D printing
  • Temperature resistance of this filament by EKO MB: 5 - highest
  • Filament strand length: 345 m
  • Made out of PETG
  • Properties of this material: rPETG
  • No gross smells and low bubble formation
  • Diameter of 1,75 mm is ideal for the printing of light or small objects
  • Total weight of the packaging is 0,75 kg

Specifications

String diameter
1.75 mm
Diameter tolerance
0.05 mm
Roll length
345 m

Dimensions

String diameter
1.75 mm
Diameter tolerance
0.05 mm
Roll length
345 m

Weight

Weight
0.75 kg

Features

Number of pcs per pack

Number of pieces in package
1 pc(s)
More Specifications
Note:
  • This product is not suitable for children younger than 10 years of age.
  • Products made of these materials are not suitable for children


Notice:
For the best results, we recommend properly drying the filament before printing.




Specifications can be changed without notice. Images are for illustrative purposes only.

There are no posts in this discussion.
Accessories for EKO MB Recycled PETG 1.75mm 0.75kg Metallic Grey

Related categories