Most expensive 3D Printer Filament
This page includes the most expensive 3D Printer Filament, or more specifically all products from the category 3D Printer Filament sorted from the most expensive to the cheapest. This way, the most luxurious pieces can stand out. At the moment, the most expensive product is Filament Spectrum 5 PACK Carbon Set 1.75mm Black 5x 0.25kg, which costs 82.90 € incl. VAT. Check it out, you may like it. Or you’ll get inspired.
1,020
Results
The Filament PLA HS 1.75mm Quantum Purple 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 55°C, recommended print speed: from 40mm/s to 600mm/s
The Filament PLA HS 1.75mm Fire Red 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 55°C, recommended print speed: from 40mm/s to 600mm/s
The Filament PLA HS 1.75mm Mirage Grey 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 55°C, recommended print speed: from 40mm/s to 600mm/s
The Filament PLA HS 1.75mm Energy Green 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 220°C, print mat temperature: 55°C, recommended print speed: from 40mm/s to 600mm/s
C-TECH filament PREMIUM LINE PLA Silk bronze
Filament - made from PLA silk, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 240°C, print mat temperature: 60°C, recommended print speed: from 35mm/s to 140mm/s
C-TECH filament PREMIUM LINE ASA yellow-orange RAL2000
Filament - made from ASA soluble, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 100°C, recommended print speed: from 30mm/s to 140mm/s
C-TECH filament PREMIUM LINE ASA signal blue RAL5005
Filament - made from ASA soluble, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 100°C, recommended print speed: from 30mm/s to 140mm/s
C-TECH filament PREMIUM LINE ASA luminescent green RAL6038
Filament - made from ASA soluble, filament diameter: 1.75mm with a tolerance of 0.05mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 100°C, recommended print speed: from 30mm/s to 140mm/s
Creality ABS 1kg Black
Filament - made from ABS soluble, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 260°C, print mat temperature: 110°C
The Filament ReFill PETG 1.75mm Machinery Orange 1kg
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
The Filament ReFill PLA 1.75mm Midnight Black 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
The Filament ReFill PLA 1.75mm Basalt Grey 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
The Filament PLA 1.75mm Sky Blue 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
The Filament PLA 1.75mm Cloud Grey 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
The Filament PLA 1.75mm Machinery Orange 1kg
Filament - made from PLA, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 50°C, recommended print speed: from 40mm/s to 250mm/s
The Filament PETG 1.75mm Circuit Green 1kg
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
The Filament PETG 1.75mm Basalt Grey 1kg
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
The Filament PETG 1.75mm Snow White 1kg
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
The Filament PETG 1.75mm Sorbet Yellow 1kg
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
The Filament PETG 1.75mm Plasma Purple 1kg
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
The Filament PETG 1.75mm Performance Blue 1kg
Filament - made from PETG, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 255°C, print mat temperature: 75°C, recommended print speed: from 30mm/s to 350mm/s
eSUN PLA+Refill 1kg Orange
Filament - made from PLA+, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 230°C, print mat temperature: 60°C, recommended print speed: from 40mm/s to 100mm/s
Filament Spectrum Premium PLA 1.75mm Oregano Green 1kg
Filament - made from PLA glossy, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 45°C, recommended print speed: from 40mm/s to 250mm/s
Filament Spectrum Pastello PLA 1.75mm Water Blue 1kg
Filament - made from PLA matte, filament diameter: 1.75mm with a tolerance of 0.03mm, weight: 1kg, print temperature: up to 215°C, print mat temperature: 60°C, recommended print speed: from 30mm/s to 150mm/s
Chcete doručit do České republiky? Jdi na
Filamenty pro 3D tiskárny
Chcete doručiť tovar na Slovensko? Prezrite si
Filamenty do 3D tlačiarne
Für den Versand nach Österreich, besuchen Sie bitte
3D-Drucker-Filamente
Magyarországra rendelnél? Látogasd meg ezt a termékkategóriát
3D nyomtató filamentek
