Insta360 Motorcycle Magic Arm
Insta360 Motorcycle Magic Arm
Accessories for Insta360 Motorcycle Magic Arm Action Camera
The Insta360 Motorcycle Magic Arm provides a robust and reliable solution for mounting a camera on the handlebars of most standard motorcycles, including sports and naked models. The design supports compatibility with hollow handlebars with 13-19 mm diameter thanks to interchangeable inserts as well as with threaded handlebars with 8 mm, 10 mm or 12 mm holes. The fully adjustable arm with 360° rotation allows flexible adjustment of the angle of view and captures the ride from different perspectives. The universal interface ensures secure mounting of the Insta360 X-Series, Ace and GO cameras for stable and dynamic footage while driving.
Key Features of the Insta360 Motorcycle Magic Arm Action Camera Accessory
- Fixed holder for motorcycle handlebars
- Compatible with common motorcycle types including sport and naked
- Fully adjustable arm with 360° rotation
- Possibility of shooting from different angles while driving
- Compatible with 13-19 mm hollow handlebars (interchangeable inserts)
- Support for threaded handlebars with 8 mm, 10 mm and 12 mm holes
- Universal interface for Insta360 X, Ace and GO series cameras
Motorcycle holder
The Insta360 Motorcycle Magic Arm opens up new possibilities for capturing your ride from different angles and delivers dynamic footage straight from the action.
Capture every angle
The fully adjustable design with 360° rotation allows you to easily adjust the angle of view as needed. Every movement during the ride can thus be captured without limitations.
Stable footage even when driving
Expansion inserts provide a firm fit in the handlebars and help dampen vibration. The result is smooth and stable footage even on uneven ground.
Quick installation
The arm can be easily removed after riding, while the base can remain in the handlebar as an end cap. The solution saves time every time you use it again.
Broad compatibility
Suitable for most motorcycle handlebars, including hollow (13-19 mm) and threaded variants (8 mm, 10 mm, 12 mm). Allows the camera to be securely mounted for reliable filming while driving.
Manual
- Installation in handlebars
- Remove the original end cap from the handlebar end.
- Select the appropriate spacer or bolt according to the handlebar type.
- Align the holder with the insert and insert it into the handlebar.
- Mounting the holder
- Tighten the mechanism so that the holder is firmly seated and stable.
- Mount the bracket arm on the base.
- Angle setting
- Adjust the desired angle of view by rotating the arm to the appropriate position.
Important notes on use
The holder is only compatible with hollow handlebars with an inner diameter of 13-19 mm and with threaded handlebars with 8 mm (1.25), 10 mm (1.25/1.5) and 12 mm (1.25/1.5) threads. When using a 360° camera, mount it directly to the mount without the use of adapters such as 1/4" to 2-prong. Do not use the holder in combination with selfie sticks, helmet mounts or other extensions.Do not extend the arm beyond the outline of the motorcycle. Use is for road or closed track use only, not off-road. Always drive safely and be aware of your surroundings, including pedestrians and other vehicles. After each stop, check the fixing of the mount and the camera, and retighten everything if it is loose. If you have difficulty tightening the screw during installation, the correct adapter is probably not used. In this case, do not use force to avoid damaging the handlebar threads.
Package contents
- 1× arm mount (Magic Arm Mount)
- 1× holder base
- 1× extension rod
- 1× bolt 6 mm
- 1× screw 8 mm
- 1× spacer 13-15 mm
- 1× spacer 15-17 mm
- 1× spacer 17-19 mm
- 1× screw adapter 8-10 mm (thread pitch 1.25 mm)
- 1× screw adapter 8-10 mm (thread pitch 1.5 mm)
- 1× screw adapter 8-12 mm (thread pitch 1.25 mm)
- 1× screw adapter 8-12 mm (thread pitch 1.5 mm)
- 1× 1/4" to 3-prong adapter
- 1× tightening screw (Thumb Screw)
- 1× large Allen key
- 1× small Allen key
- 1× flat wrench
Technical specifications
- Weight: 369.2 g (13.02 oz)
- Dimensions: 310 × 99 × 32.5 mm (12.2 × 3.9 × 1.3 in)
- Materials: aluminium alloy, stainless steel, plastic
Specifications can be changed without notice. Images are for illustrative purposes only.
