Archive - 3D Printing Accessories
Choose an alternative in the category
3D Printing Accessories
80
Results
3D Printer Accessory Ideal for materials: PEIJet 1010. MAGIGOO is an easy-to-use liquid "glue" to increase the adhesion of the first layer during printing. Good adhesion of the first layer is important, as this layer forms the basis of the entire print. MAGIGOO is water soluble, so it is easy to remove after printing. After each print, we recommend removing the adhesive with a damp cloth to prevent excess build-up of MAGIGOO adhesive on the printing surface.
Discontinued
Order Code:
PMD014a5a04
3D Printer Accessory Ideal for materials: PPJet. MAGIGOO is an easy-to-use liquid "glue" to increase the adhesion of the first layer during printing. Good adhesion of the first layer is important, as this layer forms the basis of the entire print. MAGIGOO is water soluble, so it is easy to remove after printing. After each print, we recommend removing the adhesive with a damp cloth to prevent excess build-up of MAGIGOO adhesive on the printing surface.
Discontinued
Order Code:
PMD014a5a01
3D Printer Accessory - stations for drying and curing 3D models, 42W power, 360° curing, with 20 UV lamps - 4 lamps on top, 4 on the bottom and 12 on the sides, airflow technology, 3 drying speeds, removable turntable, dimensions 245 × 235 × 305 mm
Discontinued
Order Code:
SUNRC-2
3D Printer Accessory - for Ender 3 series models, Ender 3 Pro, Ender 3 V2, Ender 3 Max, CR-10 Smart Pro and Ender 3 S1 Pro, two-speed drive, two fans, stable printing, high torque of 3.5:1, fine and precise filament feeding, simple installation and easy operation, nozzle 0.8 mm,, compatible with 2,85mm filaments, weight 288 g, dimensions 54 × 50 × 64.3 mm
Discontinued
Order Code:
CRE231228
3D Printer Accessory - dual-gear extruder for stable printing, for Creality K1 / K1 MAX 3D printers, gear ratio 1:6.25 with torque up to 60 N, support for filaments with a diameter of 1.75±0.05 mm, dimensions 38,2 × 45,5 × 41 mm, weight 60 g
Discontinued
Order Code:
CREAU2311a
3D Printer Accessory - all-metal, resistant to temperatures up to 300 °C, fast heat dissipation, smooth and even printing, compatible with the most common filaments on the market (PLA, ABS, PETG, TPU, PP, PC, Nylon etc. ), dimensions 55 × 22 × 16 mm, weight 45.5 g
Discontinued
Order Code:
CREN230308
3D Printer Accessory - LED light, warm white light, energy-efficient, long service life, easy installation, length 290 mm
Discontinued
Order Code:
CREN230313
3D Printer Accessory - for the Creality CR-10 3D printer, CR-10S, Ender-2, Ender-3, Ender 5, Ender 5 Pro, Ender 5 Plus, high-speed prints 300 mm/s, all-metal, resistant to temperatures up to 300 °C, fast heat dissipation, smooth and even printing, compatible with the most common filaments on the market (PLA, ABS, PETG, TPU, PP, PC, Nylon etc. ), dimensions 66 × 22 × 23 mm, weight 61 g
Discontinued
Order Code:
CREN230306
3D Printer Accessory - replacement castors for V-Slot profile, material POM, outer diameter 24 mm, inner diameter 5 mm, height 11 mm
Discontinued
Order Code:
CREN230309
3D Printer Accessory - for Ender-3 Pro models, Ender-3, Ender-3 V2, Ender-3s, Ender-3 Max, Ender-2 Pro, Ender-2, titanium extruder and high temperature hotend, resistant to temperatures up to 300 °C, 300 mm/s high-speed printing support, simple installation and easy operation, quick filament change, compatible with TPU filaments, PLA, ABS, PETG, PC, PA, etc., weight 450 g
Discontinued
Order Code:
CREN230305
3D Printer Accessory - lightweight and compact extruder, Revo brass nozzle, resistant to high temperatures up to 300 °C, efficient heat dissipation, gear ratio 7:1, high compatibility with ABS filaments, HIPS, PLA, PET, PVA, TPU and many others, lever handle for easy filament feeding
Discontinued
Order Code:
BITR2316
3D Printer Accessory - 5" IPS screen, 800 × 480 px resolution, 5-point touch support, adjustable brightness, Plug and Play, compatible with Raspberry Pi4, Manta M8P + CB1, Manta M4P + CB1 and other mini PCs, HDMI display port, USB-C port, 4pin XH2.54 breakout port, 3.5 mm jack
Discontinued
Order Code:
BITR2311
3D Printer Accessory - lightweight and compact extruder, with aluminium alloy cover, printing at 45 mm³/s, efficient heat dissipation, gear ratio 7:1, high compatibility with ABS filaments, HIPS, PLA, PET, PVA, TPU and many others. lever handle for easy filament feeding
Discontinued
Order Code:
BITR2315
3D Printer Accessory - lightweight and compact, with aluminium alloy cover, resistant to high temperatures up to 270 °C, efficient heat dissipation, gear ratio 7:1, extrusion force 770 N, high compatibility with filaments from PLA and ABS to TPU, nylon and PETG, lever handle for easy filament feeding
Discontinued
Order Code:
BITR2314
3D Printer Accessory - 3.5" TFT screen, 480 × 320 px resolution, SPI and I2C interfaces, FPC port for connection, terminal XH2.54, LED indicator, designed for Manta M4P/M5P/M8P + CB1
Discontinued
Order Code:
BITR2313
3D Printer Accessory - 3.5" TFT screen, for the Ender3 printer, printing from SD card and USB flash drive, Wi-Fi port for external Wi-Fi module, DC 5V power input, dimensions 93 × 87 mm
Discontinued
Order Code:
BITR2312
3D Printer Accessory - for most 3D printer motherboards, quiet operation, good heat dissipation, microstep settings 2, 4, 8, 16 can be divided into 256 steps, peak current up to 2.8 A, max. effective current 2 A, configuration via UART
Discontinued
Order Code:
BITR2306
3D Printer Accessory - 2.4" LCD display with 128 × 64 px resolution, for Voron 2.4 3D printers and others, SD card slot, RGB backlighting, Marlin support, input voltage DC 5 V
Discontinued
Order Code:
BITR2310
3D Printer Accessory - saving and suspending printing in case of filament error, reaction time 7 mm, compatible with 1,75mm filaments, for Marlin 2.0x firmware, dimensions 75 × 30 mm, weight 60 g
Discontinued
Order Code:
BITR2309
3D Printer Accessory - ARM Cortex-M4 processor STM32F446ZET6 series, 180 MHz, support for up to 8 stepper drivers with a total of 9 outputs, expansion ports for supporting various expansion modules (e.g. BL Touch, LCD screen, RGB light, auto shut off etc. ), compatible with Klipper and Marlin software, USB-C interface, up to 6 PWM fans (optional voltage 5, 12 or 24 V), 24V power input
Discontinued
Order Code:
BITR2308
3D Printer Accessory - a tool for changing nozzles of a 3D printer, 360° rotatable, 10, 9, 8, 7 and 6mm wrench in the package, compatible with E3D V6, Volcano, Mk8, Mk9, CR10, quick and easy installation
Discontinued
Order Code:
BITR2307
3D Printer Accessory - ARM Cortex M0 processor + STM32G0B1RET6, upgrade for Creality Ender and CR-10 series, for improved performance and more stable printing, connectors for 3 controllable CNC fans, Micro USB port for connection to a computer, module support for BLTouch, TFT touch screen, LED strips, automatic shutdown, filament sensor etc., compatible with Klipper and Marlin software
Discontinued
Order Code:
BITR2305
3D Printer Accessory - ARM Cortex-M0+ STM32G0B1VET6 processor, 64 MHz, optional CNC fan voltage, 5V / 12V / 24V, 2× micro HDMI port, expansion ports to support various expansion modules (e.g. BL Touch, LCD screen, RGB light, auto shut off etc. ), eFuse circuit protection, compatible with Klipper and Marlin software
Discontinued
Order Code:
BITR2304
3D Printer Accessory - ALLWINNER H616 processor, quad-core Cortex-A53 with a frequency of 1.5 GHz, 1 GB DDR3 RAM, support for 4K displays, Supports 100M Ethernet and 100M WiFi, compatible with Klipper software in combination with Manta M4P/M5P/M8P, compatible with Linux and Debian OS
Discontinued
Order Code:
BITR2303
3d tiskToleranz des Filament-Durchmessers (GLOSSAR)
Die Toleranz des Filament-Durchmessers sollte so gering wie möglich sein. Nur so kann ein reibungsloser 3D-Druck gewährleistet werden.
Der Durchmesser der Drucksaite, bzw. des Filaments, also des Materials, aus dem der 3D-Drucker das Produkt herstellt, wird durch den von Ihnen verwendeten 3D-Drucker beeinflusst.
Lernen Sie, wie Sie mit Ihrem 3D-Drucker ein individuelles Smartphone-Case erstellen. Diese Anleitung führt Sie Schritt für Schritt durch den Prozess, von der Auswahl des 3D-Modells bis zur Nachbearbeitung. Entdecken Sie die Vorteile des 3D-Drucks und designen Sie Ihr...
Wie behebt man Verstopfungen der Düse beim Creality Ender-3 V3 KE?
Effiziente Düsenwartung für den Creality Ender-3 V3 KE: Entdecken Sie Ursachen und Lösungen für verstopfte Düsen. Erfahren Sie präventive Maßnahmen, um Druckqualität und Lebensdauer zu optimieren. Mit nützlichem Zubehör und detaillierten Anleitungen perfekt für...
Das Canon MegaTank System ist für Anwender gedacht, die häufig große Mengen an Dokumenten, Bildern oder Fotos drucken und dabei Tintenkosten sparen wollen. Das MegaTank System umfasst Drucker und Multifunktionsgeräte mit großvolumigen Tintentanks. Diese Geräte haben...
If you are thinking about 3D printing but do not know where to start, this article is what you need. We'll guide you through the basics of 3D printing - we'll help you to choose the right printer, make a list of things you need for printing and show you how and where to...