Zalman MS1000-HS1
PC Case black midi tower, ATX, 7x5.25", 3x3.5", 200x500x560mm, no PSU
Show full description
Code:
CA069e1
Producer's Website:
Zalman MS1000-HS1
Discontinued
Zalman MS1000-HS1
Computer Case Zalman MS1000-HS1 offers excellent cooling capabilities.It is equipped with noise adsorbujícím material on the side panels for a substantial reduction in noise emission.Her cage for hard disks completely supports hot-swappable connectivity and accessibility from the front, as is the case for server cabinets.The package then you can also find a bracket in 5.25 "bay that holds up to two modern 2.5" solid state drives.
The inside of the box is spacious enough to accommodate the graphics card up to a length of 300 mm.Its base is equipped with rubber feet to eliminate transmission of vibration from the floor to the chassis housing.At the bottom of the cabinet also find a removable dust filter, which eliminates dust into the suction source.Front-accessible connectors are located on the top panel, where they are easily attainable.Specifically, you have two USB ports, one ATA eSerial connector and standard audio jacks.
Specifications:
General:
Color:Black
Material:Structure SECC/ABS plastic parts
Format box:Midi Tower
For motherboards:ATX, Micro ATX
Position:
7 x 5.25 "external
3x 3.5 "hot-swap Serial ATA I/II
Connectors on the front (upper) panel:
2x USB 20
1x ATA eSerial
1x headphone
1x microphone in
Cooling system:
1x 92 mm fan inside the slot for discs (installed)
1 rear 120 mm fan (installed)
2 top 120/140 mm position (1x 120 mm fan installed)
1x lower 120/140 mm position
Expansion Slots:
7x
Source:
The cabinet is supplied without power supply (ATX position with a filter at the bottom)
Other:
Noise adsorbing side panels of corporality
The holes for water cooling
Bracket to the 5.25 "drive bay for mounting a pair of 2.5" SSD
Čelně accessible hot-swap hard drives for position
Max.length graphics cards:300 mm
Design:
Dimensions:200 x 500 x 560 mm (W x H)
Weight:11.7 kg
The inside of the box is spacious enough to accommodate the graphics card up to a length of 300 mm.Its base is equipped with rubber feet to eliminate transmission of vibration from the floor to the chassis housing.At the bottom of the cabinet also find a removable dust filter, which eliminates dust into the suction source.Front-accessible connectors are located on the top panel, where they are easily attainable.Specifically, you have two USB ports, one ATA eSerial connector and standard audio jacks.
Specifications:
General:
Color:Black
Material:Structure SECC/ABS plastic parts
Format box:Midi Tower
For motherboards:ATX, Micro ATX
Position:
7 x 5.25 "external
3x 3.5 "hot-swap Serial ATA I/II
Connectors on the front (upper) panel:
2x USB 20
1x ATA eSerial
1x headphone
1x microphone in
Cooling system:
1x 92 mm fan inside the slot for discs (installed)
1 rear 120 mm fan (installed)
2 top 120/140 mm position (1x 120 mm fan installed)
1x lower 120/140 mm position
Expansion Slots:
7x
Source:
The cabinet is supplied without power supply (ATX position with a filter at the bottom)
Other:
Noise adsorbing side panels of corporality
The holes for water cooling
Bracket to the 5.25 "drive bay for mounting a pair of 2.5" SSD
Čelně accessible hot-swap hard drives for position
Max.length graphics cards:300 mm
Design:
Dimensions:200 x 500 x 560 mm (W x H)
Weight:11.7 kg
Note:
Specifications can be changed without notice. Images are for illustrative purposes only.
