ONKYO HT-R558 Black
Don't like the alternatives? Choose from the full product list
ONKYO HT-R558 Black
AV receiver or the basic building block for the construction of efficient and extensive audiovisual home entertainment center. Containscomplete set of HD decodersto get multichannel audio from Blu-ray disc without quality loss, it is ready totransmission of 3D contentthrough a set of inputs and outputs HDMI version 1.4 and play compressed music from your iPod/iPhone or USB external storage. A pleasant surprise is the presence of uniqueWRAT technology and Audyssey calibration.Studio-quality sound
When watching Blu-ray movie you hearabsolutely pure, uncompressed audio. Blu-ray audio bitrate 24.5 Mbit/s is decoded systemDTS-HD Master Audiobit by bit and converted to analogue converters in the receiver. Your ears will thus getcompletely faithful reproductionin the form in which it was created in a recording studio.
Accurate reproduction without distortion
Audio performance and hi-end speakers for several hundred thousand can easily degrade poor acoustics. In the ONKYO to know very well, and therefore model HT-R558 equipped calibrationAudyssey 2EQ. It is a technology thatcalibrates speakers and amplifierso that the distribution of acoustic waves were tuned by the room.
The uniqueness of the name WRAT
WRAT was recently found only in high-end AV receivers. It is now also part of the available models. What is the matter? WRAT technology is a broadband amplifier that Japanese engineers put the internal amplifier circuits toreduce signal noise and minimize distortionover the entire frequency range.
Direct playback from iPod/iPhone
ONKYO HT-R558 was lucky and the production receivedcertified "Made for iPod/iPhone". This means that the receiver can totally relate to your Apple devices through the USB interface. Buffered songs in your iTunes library so you can comfortablyplay directly from your iPhone or iPod and it completely digitally without any loss of quality.
Amplifier:
Number of Channels: 5
Power per channel (6 ohms, 1 kHz, 1% THD): 100 W
Total harmonic distortion (THD): 0.08%
Damping factor: 60
Input sensitivity and impedance: 200 Ohm mV/47
Frequency Response: 5 Hz - 100 kHz
Bass control: +/- 10 dB 50 Hz
Treble: +/- 10 dB 20 kHz
Signal-to-Noise Ratio: 100dB
Speaker Impedance: 6-16 Ohm
D/A converter:
Burr-Brown 192kHz/24bit (for each channel)
DSP chip:
Type: 32-bit
Modes: games, rock, sports, action, RPG
Audio Decoders:
Dolby Digital Plus
Dolby TrueHD
DTS-HD Master Audio
DTS-HD High-Resolution Audio
Audio Calibration
Audyssey 2EQ
Audyssey Dynamic EQ
Audyssey Dynamic Volume
Tuner:
FM frequency range: 87.5 - 108 MHz
AM Frequency Range: 522 - 1611 kHz; 530 - 1710 kHz
Preset at 40 stations
Services RDS (PS/RT/PTY/TP)
Interface:
color-coded speaker terminals
1 Pre-out for subwoofer
4x HDMI 1.4 input
1x HDMI 1.4 output
5 x composite video input
2 x composite video output
2x component input
1x Component
1x coaxial digital audio input
2x optical digital audio input
6x analog audio input
1x analog audio output
1x headphone
1 entry for IR sensor
1 x AM antenna input
1 x FM antenna input (75 Ohm)
1x USB input
Dimensions:
435 x 150 x 318 mm (W x D x H)
Weight:
7.6 kg
Consumption:
300 watts
Included accessories:
FM indoor antenna
AM loop antenna
Tags for speaker cables
User Manual
Quick Setup Guide
Remote Control + 2x AA batteries
Specifications can be changed without notice. Images are for illustrative purposes only.
